PEEK Machined Part
PEEK Machined Parts. Firstly, PEEK Plastic is well known for being a high performance Engineering thermoplastic.
Also, the term PEEK is an abbreviation for polyetheretherketone. Further, various grades of PEEK exist. Thus, offering good chemical and water resistance, and can operate at high temperatures.
Read More About Our Plastic Machined Parts Process:
Email Your Enquiry 
Notably, in hot water or steam, it can be used continuously to 480°F (250°C). Importantly, without permanent loss in physical properties.
Above all, used in hostile environments, the PEEK Machined Part s are a high strength alternative to traditional ferrous materials.
Also, another plus point, PEEK Machined Part carries a V-0 flammability rating. While, exhibiting a very low smoke and toxic gas emission.
Perfect for use in FDA food contact applications.
PEEK Machined Part supplied to customer requirements.
Further, as a leading Plastic Machining company, PEEK gives us very little problems. Indeed, in our skilled hands, most requirements can be achieved. Moreover, the company offers Custom PEEK CNC Turned Components, Machined in prototype or large batch quantities.
PEEK Machined via CNC Turning Rod Form Plastic
Peek CNC
Above all, with unsurpassed familiarity, PEEK is just another Engineering Plastic. From which, Sentinel Plastics Machine quality Parts for its customers. Although, it may require special handling to minimise internal stresses and heat-related problems during Machining. Having, over 30 years of Experience CNC Machining speciality Plastics. Subsequently, Sentinel has the technical and Manufacturing expertise to produce precision Custom Machined PEEK Part Turned to high specification.
Again, as a leading Plastics company, PEEK gives us very little lathe Machining problems. Indeed, in the right hands, most requirements can be achieved. Sentinel Plastics offers Custom PEEK Machined Part Turned in prototype or large batch sizes. Thus, In the right hands, PEEK can be good Engineering Plastic to Machine. As such, it may require special handling to minimise internal stress and heat-related cracks during Machining. Having, over 30 years of Experience CNC Machining speciality Plastics, means, we have the technical and Manufacturing expertise to produce precision Custom PEEK CNC Milled Parts to high specification.
Notably, PEEK, or polyetheretherketone, is a popular thermoplastic used for a wide range of industrial Parts and Components. In the main, because it exhibits that excellent strength, wear resistance, abrasion resistance, and retains its properties at high temperatures.
Virgin PEEK™
PEEK Machined Parts made from general purpose Unfilled PEEK™. I.E., not reinforced. Also. offers the highest elongation and toughness of all PEEK grades.
Further, PEEK™ Material is available in the following colours: LIGHT BROWN (natural colour) and BLACK.
Black PEEK™ is ideal for instrument Components where aesthetics are important, as well as for seal Components where ductility and inertness are important.
Unfilled PEEK™ grades comply with FDA regulation 21 CFR 177.2415 for repeated food contact.
30% Glass Filled PEEK™
Another instance, 30% glass filled PEEK™ Parts have an increase in flexural modules and a reduction in expansion rate.
This grade is ideal for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F (150°C).
Glass-filled PEEK™ is only available in a LIGHT BROWN colour.
30% Carbon Filled PEEK™
Also available, 30% carbon filled PEEK™ Parts have enhanced compression strength and stiffness and a dramatically lower expansion rate.
It offers designers optimum wear resistance and load carrying capability in a PEEK™-based product.
This grade provides 3½ times higher thermal conductivity than non-reinforced PEEK™ — dissipating heat from the bearing surface faster.
Carbon-filled PEEK™ is BLACK in colour.
Sheet & Bar PEEK
Well known for being a high performance Engineering thermoplastic.
The term PEEK is an abbreviation for polyetheretherketone. Various grades of PEEK exist, offering good chemical and water resistance, and can operate at high temperatures.
Commonly, used in hostile environments, the Material PEEK is a high strength alternative to traditional ferrous materials.
Also, another plus point, PEEK carries a V-0 flammability rating. While, exhibiting a very low smoke and toxic gas emission.
Perfect for use in FDA food contact applications.
PEEK Applications
PEEK polymer is used typically as a replacement for Machined metals in a wide variety of high performance end-use applications. These range in diversity from Components for cars, aircraft, industrial pumps, valves and seals, to silicon wafer carriers, connectors and sterilisable surgical instruments and in the medical implants market.
Ideally Located to Supply Plastic CNC Machined
Importantly, being strategically positioned in the heart of the West Midlands. Certainly, is a valuable position for a business that supplies companies all over the UK and Europe. Markedly, the company has clients in China and the USA as well as in the local vicinity. While, already having an already large client base, among whom it can boast many long-term blue-chip clienteles. Hence, the company is currently attracting large amounts of extra business. Mainly, through reputation, but, also due to a very active and successful sales team.
Capacity
Significantly, to produce PEEK Machined Parts, Sentinel have 15 No CNC Machines, which includes 2 Mazak VCN 530C with 5 No XYZ 1020 VMC. Also 3 Bridgeport’s VMC plus 2 ProTurn Lathes and a 2 Mazak Mill/Turn. These are just a few of the Machines that are available to produce Quality Plastic CNC Components.
Contact us for your PEEK machined Part and More
Finally, peruse the website, drop your enquiry on an email or please do give us a call.
Further PEEK Information HERE
Services
Lastly, here your industrial Plastic Parts can be Turned or Milled as well as Routed and Fabricated. And also, Drilling, Taping and Assembly of Plastic Parts are just some of the other services available. Whether you require Precision Parts, Prototypes, Production Batches or just some help and advice. Our staff are more than willing to help. So, please peruse the website, drop your enquiry on an email or please do give us a call. Send your enquiry today for PEEK CNC Milled Components.
Further, For More in depth information, Follow the Quick Links below.
Sentinel Plastics Business Google – LinkedIn Plastic Machining Company – Sentinel Plastic News on Twitter